In Stock
Share
Show All
TURBOSOUND NUQ8 AN SPEAKERS
AudioVisual & FX
St Kilda, VIC, Australia
Day
$132
Week
$660
Month
$1,980
Bond
$200
Delivery unavailable
Customer collect only
Description:
NuQ82-AN 600W 2-Way 8" Full-Range Powered Loudspeaker from Turbosound is ideally suited for a wide range of portable and fixed-installation speech-and-music sound-reinforcement applications. Designed to work individually without a controller, the NuQ82-AN Loudspeaker provides optimal performance for FOH, sidefill, and delay-line loudspeakers, and is an ideal choice for wedge monitoring applications. It also offers the flexibility to accommodate venue-specific requirements for install applications.
The NuQ82-AN Loudspeaker features an 8" low-frequency driver with a low-mass voice coil for improved transient response and an aluminum dome with 1" neodymium high-frequency compression driver, which is mounted on a rotatable 100 x 60° (horizontal x vertical) dispersion-converging elliptical waveguide. Output power for the NuQ82-AN Loudspeaker is provided by means of an efficient and lightweight KLARK TEKNIK 600W Class-D power amplifier. An easy-to-use KLARK TEKNIK Digital Signal Processor (DSP) provides dynamic EQ for impressive full-range response at low volume levels and transparent limiting for clarity at high-output levels as well as for long-term reliability.
On the rear panel of the amplifier module, the user interface’s LCD display and single rotary encoder provide intuitive access to position compensation, user EQ control, subwoofer integration, and signal-routing features. In addition to the balanced XLR input, an XLR output is provided for daisy-chaining more active loudspeakers or for use with active subwoofers. An onboard USB port provides access for remote control of the NuQ82-AN Loudspeaker via Windows computer, as well as DSP firmware updates.
ULTRANET connectivity is provided by two locking etherCON connectors. Up to 16 independent channels of 24-bit digital audio and control data are transmitted via a single Cat5 cable between compatible digital devices including mixers, input/output stage boxes, powered loudspeakers and personal monitoring systems. Simplified cable routing and ease of setup translate directly into significant time saved during installation.
Finished in a highly durable semi-matte black paint, the trapezoidal cabinet is constructed from 12mm birch plywood, and includes a rugged powder-coated perforated-steel mesh grille. Multiple threaded rigging points are provided for suspension in any orientation. The NuQ82-AN Loudspeaker also features a 35mm socket for standard pole mounting plus integrated handles for convenient transport. Mains-power input is provided via a Neutrik powerCON connector.
2-way full-range powered loudspeaker for portable PA applications
600W power featuring KLARK TEKNIK Class-D technology for total system control
ULTRANET digital-audio networking connects to mixers and other sources
8" low-frequency driver with low-mass voice coil for improved transient response
Aluminum dome with 1" neodymium motor compression driver
Rotatable converging-elliptical waveguide provides 100 x 60° (H x V) dispersion
Fully featured user interface with LCD display for ease of navigation
Windows computer remote-control software downloadable
12mm birch-plywood enclosure with hard-wearing semi-matte black paint finish
Rugged powder-coated perforated-steel mesh grille
Integral 35mm pole mount and handles
Multiple internal rigging points allow bracket mount and suspension in any orientation
Mains input on Neutrik powerCON connector
Turbosound NUQ82 Specs
System
Frequency Response
65 Hz to 18 kHz ±3 dB
55 Hz to 20 kHz -10 dB
Nominal Dispersion
100 x 60° (H x V) @ -6 dB points, rotatable
Maximum SPL
122 dB peak
Crossover Type
Active
Transducer
1 x 8" (211.5 mm) LF driver
1 x 1" (25.4 mm)
HF compression driver
Limiter
Independent HF, LF, peak, and rms
Amplifier
Maximum Output Power
600 W
Type
Class-D
Protection
Short circuit, thermal
Connectors
Input/Output
1 x combo jack / XLR 1 x XLR
Sensitivity
+4 dBu or +14 dBu software switchable
Input Impedance
40 kOhms balanced
Maximum Input Level
+22 dBu
Connectivity (RJ-45)
2 x RJ45
Mains Supply
Neutrik powerCON 20 A
DSP
DSP
Rotary push-encoder and level control
Buttons for Process, Setup, Exit, Enter
Display
LCD 128 x 32, blue, backlit
Delay
0 to 300 ms
Equalization
High- and low-shelving EQ
2 x parametric EQ Presets: Positioning, Sound mode, FBQ
Limiter
Zero-attack input limiter
Presets
20 total presets, 19 user-definable
Crossover
High-Pass L-R 24 dB/oct
Protection
Lock-out function for all settings
Connectivity
Processing
24-bit, 44.1/48 kHz sample rate (digital)
Converter Type
24-bit, delta-sigma
System
Signal 16 channels
Latency < 0.9 ms
Frequency response 20 Hz to 20 kHz (+0 / -3 dB)
Dynamic range typical 92 dB
Cabling
Shielded Cat5
Maximum 246' (75 m) (not included)
Power Supply
Power Consumption
80 W @ 1⁄8 maximum power
Voltage
120 V, 60 Hz (T 6.3 A H 250 V)
Construction
0.5" (12 mm) birch plywood
Grille
Powder-coated perforated steel
Dimensions (H x W x D)
18.3 x 10.8 x 9.90" (46.4 x 27.4 x 25.2 cm)
Weight
24.9 lb (11.3 kg)
Location:
AudioVisual & FX
St Kilda, VIC, Australia
St Kilda, VIC, 3182